Your new Hawk Scroll Saw utilizes the conventional 5″ long, straight end (non pin end) scroll saw blade. The numerous sizes and types that are readily available for this blade are easily purchased by telephone or online from Bushton Manufacturing. Be sure to use only high quality blades for optimum performance and accomplish the very best results with your saw – every time. Below, you will find a scroll saw patterns that can be used for either horizontal or vertical cuts:
The horizontal pattern is ideal for woodturning on a workbench or table top as the scroll saw is light enough to lift from the floor. It has an ample dust collection chamber to assist in keeping the saw clean. The saw blade extends up from the bottom of the machine. This saw is very versatile due to its ability to cut on both flat and curved surfaces. A built-in rubber mallet head prevents front-end damage due to vibration caused by turning.
The vertical pattern is an excellent choice when using the hawk wood scroll saws on small to medium-sized projects. This design allows for complete control of the depth of cut and the angle of attack. It comes with a useful accessory called a “baking stone.” The saw’s vibration absorption and dampening system allow it to maintain a stable cut even on rough or uneven surfaces.
Both the horizontal and vertical designs of the hawkeye scroll saw have an option to attach a dust collection plate at the bottom of the machine. Some models may also incorporate a blade guard that attaches to the side of the blades. These plates provide additional protection for the blades and allow efficient dust collection. If you do not have a dust collection plate on your saw, you can attach one separately.
The vertical design of the hawk scroll saw consists of two separate blade sections. The top blade section has a tapered blade that cuts in a straight path. The lower blade section has a serrated edge for cutting wood edges. This design eliminates back-and-forth movement that can cause slip and wear on the blade. The blade is easily maneuvered with the included brand hook and no cutting tools are necessary to remove the blade.
Both horizontal and vertical units come with the blade tension tool. This feature allows the user to change the tension settings inside the unit. If you want to make finer detailed cuts, you can use the tension settings to attain a stiffer unit. If you want to achieve a looser sawing action, you can use the looser setting. hawk wood scroll saws allow you to effortlessly perform both tasks with the appropriate blade tension.
The motor on the scroll saws is quite efficient. It is designed to run quietly and at the lowest possible speeds so you can work without distraction. There is no need to worry about adjusting the start or stop speeds as they are consistent and very easy to operate.
hawk wood scroll saws are made with the finest technology and precision parts. Unlike other units, there is no need to worry about vibration affecting the operation of the saw. The sealed bearings provide smooth operation and eliminate buzzing, ringing, and grinding noises. The blades are sealed with silicon oil, which further insures the blade and eliminates moisture from the inside of the blade.
When it comes to the blade itself, there are two blade options to choose from: the full blade and the left and right tilt. Each option has its own advantages and disadvantages, but most saws will be able to handle either option. The full blade allows the saw to cut through difficult and thick materials. However, it requires you to turn the blade at a ninety degree angle, which makes it harder to cut straight.
Most scroll saws will come with an attachment known as the dust blower. This accessory can help clean up a lot of the dust that accumulates after each cut. The dust blower attaches to the top of the saw and collects all of the dust during the cut. The dust blower also helps the scroll saw run quieter, because it eliminates the motor’s decibels. hawk makes several different types of dust blowers, depending on the size of the scroll saw that you own.
One of the best features of the hawk saw is the built in accessory. The hawk blade locks into place when you flip the lever, preventing it from turning. This feature limits vibration, which means that the scroll saws run quietly and don’t cause any annoying noise when they run. hawk makes a few other accessories to help make your saw more efficient and limit vibration, including the blade guard and dust collector.